90lb Elephant Anchors 50 Anchors + 50 Screws + 1 Titanium Drill Bit. Heavy Duty anchor Toggle Bolt for DryWall when no stud & Metal Stud Walls
CondoMounts - Designed for easy Installation with minimum tools. We provide essential drill bits and bolts.
We develop state of the art TV mounts for today's homes. Unique mounts patented and designed out of Toronto, Canada. We have the best industry wide rating for TV mounts.
Made especially for your viewing pleasure. Our mounts have unique swivels, tilts and rotation; meeting the varied needs of today's homes. We are sure you will love our mounts.
The Elephant Anchor provides a secure hold from within various hollow materials 3/8" - 3" thick including drywall, MDF, sheetrock, plasterboard, wallboard, sheet rock, gypsum board, buster board, custard board, or gypsum panel and concrete block. The anchor channel will NOT rotate when installing the bolt, whether installing by hand or with a drill driver, and will stay in place if the bolt is removed to facilitate fixture and screw changes.
- 50pcs of 1/4-20 Elephant Anchors
- 50pcs of 1/4-20 Screws
- 1/2" Titanium Pilot Head Drill Bit to cut the metal stud easily
- Specific Uses For Product - Wall with Metal Stud, Mounting there are no studs in hollow wall.
- Mounting Hole Size - 1/4" or bigger
- 5 X Faster Installation than Wing Toggles & Molly Bolts
- NO Stud Required
Strong & Easy-To-Use Anchors
Make the most of your living or working space by mounting your TV to the wall for convenient and comfortable viewing. This product can also used for mounting when a stud is not available. The provided revolutionary toggle bolts have an ultimate tensile pull out value of 200 lbs. Industry standards recommend 1/4 of ultimate test load.
✔They make smaller holes (1/2" Holes) and are 5x faster to install the wing bolts or wing toggles
✔Finger shaped curved grips to hold plastic strap to install threaded metal channel
✔Time Saver — 10-20 minutes faster then any wing or molly anchors per wall mounting project
✔Elephant anchors install independently without bolt unlike traditional wing anchors.
✔Installs through Drywall, Sheetrock, Plasterboard, MDF, Lathe and Plaster, Plywood, Metal Studs.
✔Bolt can be removed and fastened at anytime without threaded metal channel falling into wall
- Highest Quality No Stud Anchors - The CondoMounts Heavy Duty Drywall Anchors and Screws are designed to work in either a wall or a ceiling. Our Anchors are an updated version of wing/toggle bolts, making installation up to 5x faster while using a smaller hole and holding more. 1/4"-20 screws and a 1/2" drill bit are included in this kit for your convenience.
- A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board.
- Heavy Duty Mounting - Perfect for mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!
- Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel; plastic straps attached to the channel that position it into place; and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material.
- A Hold You Can Trust - The CondoMounts anchor channel will not rotate when installing the bolt, whether installing by hand or with a drill driver, and will stay in place if the bolt is removed to facilitate fixture and screw changes.