Skip to content

How to mount a TV in brick

by Shassi Kumaran 24 Apr 2024
How to mount a TV in brick

Mounting a TV on a brick wall can be a daunting task, but with the right tools and techniques, you can achieve a secure and stylish installation. In this guide, we'll walk you through the step-by-step process of mounting a TV on a brick surface, covering everything from preparation to installation and safety considerations.


1. Assess Your Wall and TV

Before you begin, it's essential to assess both your brick wall and the TV you intend to mount. Check the condition of the brick surface to ensure it's sturdy and suitable for mounting. Also, consider the weight and size of your TV to determine the appropriate mounting hardware.

2. Gather Your Tools and Materials

Here's a list of tools and materials you'll likely need for the installation:

  • Drill with masonry bit
  • Wall anchors suitable for brick (e.g., sleeve anchors, expansion anchors)
  • Screws appropriate for your TV mount
  • Level
  • Tape measure
  • Pencil or marker
  • Screwdriver or wrench

3. Choose the Right Mounting Location

Select a suitable location on the brick wall for your TV. Ensure it's at a comfortable viewing height and away from potential hazards like heat sources or direct sunlight. Use a level to mark the desired position for accurate placement.

4. Drill Pilot Holes

Using a drill with a masonry bit, carefully drill pilot holes into the brick at the marked locations. Make sure to use the appropriate drill bit size for your wall anchors to ensure a secure fit.

5. Install Wall Anchors

Insert the wall anchors into the pilot holes. Depending on the type of anchor you're using, follow the manufacturer's instructions for proper installation. Wall anchors are crucial for providing stability and load-bearing support on brick surfaces.

6. Attach the TV Mount

Align the TV mount with the installed wall anchors and secure it in place using screws. Use a wrench or screwdriver to tighten the screws firmly but avoid overtightening, which could damage the anchors or the brick.

7. Mount Your TV

With the TV mount securely attached to the brick wall, it's time to mount your TV. Follow the manufacturer's instructions for attaching the TV to the mount. Enlist the help of a friend or family member to lift and position the TV safely onto the mount.

8. Test for Stability

Once the TV is mounted, give it a gentle shake to ensure it's securely attached to the wall. Check for any signs of movement or instability. If needed, adjust the mount or tighten the screws further to achieve a stable installation.

Safety Tips

  • Always wear protective eyewear when drilling into brick to prevent debris from entering your eyes.
  • Use caution when handling heavy TVs and enlist assistance if needed to avoid injury.
  • Double-check the weight capacity of your TV mount and ensure it can support the weight of your TV.


Mounting a TV on a brick wall requires careful planning and execution, but with the right tools and techniques, you can achieve a professional-looking installation. By following these steps and considering safety precautions, you'll be able to enjoy your favorite shows and movies with confidence in your securely mounted TV. Remember to take your time during each step to ensure a successful and long-lasting TV mounting experience on brick.


Prev Post
Next Post

Thanks for subscribing!

This email has been registered!

Shop the look


Choose Options

Edit Option
Back In Stock Notification
this is just a warning
Login Close
Shopping Cart
0 items